Miscellaneous
Home / Products / Hinges / Miscellaneous

Heavy Weight Two Knuckle Full Mortise Concealed Bearing (CB0701, CB0761)

CB0701– (ANSI A8111) – Steel – polished and plated or phospahated and prime coated for painting
CB0761– (32) – (ANSI A5111) – Stainless Steel – highly polished
CB0761– (32D) – (ANSI A5111) – Stainless Steel – satin finish

Features
  • For heavy doors, or doors where high frequency is expected
  • Concealed bearing, takes both vertical and lateral loads
  • Secure: Door cannot be lifted off when in closed position
  • All hinges have template screw holes location for use on either wood or hollow metal doors and frames
  • Loose joint – specify hand

Shock Arrestor

225R – Steel – phosphated and prime coated for painting or polished and plated

Features
  • Protects against loosened screws and bent hinge leaves
  • For doors 1 3/4” (44 mm) thick with either standard or heavy weight hinges 4 1/2” (114 mm) wide
  • Designed to fit doors inset 1/8” (3.2 mm); for flush applications, place a 1/8” (3.2 mm) shim underneath the frame plate
  • Brass pintle and large screws resist maximum shock loads
  • Surface applied
  • For square or beveled edge doors

Olive Knuckle Hinge

BB95 – (ANSI A1612) – Forged brass – polished and finished

Features
  • For interior or exterior doors that demand hinges with the smart clean look
  • Can be used on hollow metal or wood doors and frames
  • Ideal for use in offices, restaurants, recreational building and residences
  • Designed in particular for 1 3/8” (35 mm) to 1 3/4” (44 mm) average frequency doors
  • Equipped with an anti-friction bearing assembly
  • Template hole locations
  • Handed – when ordering specify right or left hand
  • Edge of hinge closest to the barrel should be 1/4” (6.4 mm) from face of door, regardless of door thickness

Heavy Gauge Plain Bearing Full Surface

Features
  • No hole construction featuring heavy gauge steel and fast spun pins
  • Not swaged for full surface weld on applications
  • Hinge widths are approximately 1/8 ̋ less than nominal sizes shown
  • All sizes have five knuckles
  • Plain steel
  • Bulk packed

Residential Grade Double Acting Floor Hinge

BB159 – (ANSI K82183) – Steel – satin brass finish (US4)

Features
  • For low frequency residential double acting wood doors 1 3/8” to 1 3/4” thick weighing up to 75 lbs
  • Holds door open at approximately a 90º angle on either side of opening
  • Ball bearing located at the top of the hinge carries the weight of door and takes the thrust of spring
  • Hardened steel roller, working with the cam, ensures easy and noiseless operation
  • Spring tension is fully adjustable
  • Set consists of top pivot, horizontal floor hinge, decorative plates, fasteners and installation instructions

Wardrobe Pivots

327 – (ANSI A8782) – Heavy weight – steel – satin chrome (26D) plated

Features
  • For overlay doors 1 3/8" (35 mm) to 1 3/4" (44 mm) thick doors not exceeding 150 lbs (60 Kg)
  • Ideal for wardrobe doors
  • Bearing take vertical and lateral loads
  • Designed for mullion of face frame mounting
  • Doors can be installed floor-to-ceiling
  • Screw holes allow for vertical and horizontal adjustment
  • Doors can be opened 180º
  • Non-handed

Wardrobe Pivots

340 – (ANSI A8753) – Standard duty – steel – plated or prime coated finishes

Features
  • For flush, recessed or overlay doors 1 1/8" (28.6 mm) to 1 3/8" (35 mm) thick not exceeding 75 lbs (34 Kg) 
  • Only pivot of its type suitable for floor-to-ceiling doors
  • Clean appearance, only hinge pivot shows when door is closed
  • Door can be opened 180º
  • Elongated screw holes make alignment simple
  • Separable leaves of the top assembly permit fast installation
  • Bushing at the pivot point assure smooth, silent operation

Wardrobe Pivots

341 – (ANSI A8773) – Standard duty – steel – plated or prime coated finishes

Features
  • For flush, or recessed doors 1 1/8" (28.6 mm) to 1 3/8" (35 mm) thick not exceeding 75 lbs (34 Kg)
  • Top header and bottom side frame mounted
  • Suitable for floor-to-ceiling doors
  • Door can be opened 180º
  • Elongated screw holes for easy alignment
  • Separable leaves of the bottom assembly for quick, easy installation
  • Bushing at the pivot point assure smooth, silent operation
  • Edge mortise door leaves – standard practice

Wardrobe Pivots

342 – (ANSI A8783) – Standard duty – steel – plated or prime coated finishes

Features
  • For overlay doors 1 1/8" (28.6 mm) to 1 3/8" (35 mm) thick doors not exceeding 75 lbs (34 Kg)
  • Designed for mullion or face frame mounting
  • Suitable for floor-to-ceiling doors
  • Doors can be opened 180º
  • Elongated screw holes for easy alignment
  • Mortised door leaves – Standard practice
  • Bushings at the pivot point assure smooth, silent operation
  • Non-handed

Cabinet Hinges

1592 – Button tip – steel – satin chrome (26D) finish
HT1592 – Hospital tip – steel – satin chrome (26D) finish

Features
  • Made of heavy .088" gauge steel
  • For 3/4" (19 mm) thick overlay doors
  • Has interleaf design for close door fit
  • Elongated screw holes for easy vertical and horizontal alignment

Simply STANLEY.

Every STANLEY product is intentionally designed with features that make it more secure, functional or easy to maintain.

Resources

icon-catalog.png

General Hinge Catalog

DOWNLOAD

icon-catalog.png

Cabinet & Wardrobe Hardware Catalog

DOWNLOAD

icon-catalog.png

Miscellaneous Door Hardware Catalog

DOWNLOAD

Knowledge Base

We offer a number of online tools that you can access quickly and easily, whenever you need it.

Get support